Integrated Solar Panels
| DOWNLOADS
Benefits: |
 |
|
 |
The Integra In-roof Integrated Solar Panel consists of a double header absorber construction. The accompanying flashing kit compliments the sleek timber housing and provides a water and wind tight assembly and guarantees a hassle free and aesthetically pleasing solar panel assembly.
The exposed panel components are resistant to UV, freezing and salty environments. The unique glass mounting feature guarantees the ultimate product reliability and durability.
TECHNICAL SPECIFICATION
| Type of construction |
Flat plate collector for in-roof assembly |
| Dimensions | 2063 x 1228mm |
| Gross Area | 2.53m² |
| Aperture Area | 2.32m² |
| Height | 107mm |
| Absorber Area | 2.29m² |
| Total Weight | 54kg |
| Liquid Content |
1.6 litres |
| Nominal Flow | 120 l/hr |
| Collector Connection |
2 connectors on top, 1” Swivel Nut |
| Absorber Type | Harp absorber from copper or Aluminium |
| Absorber Coating |
Highly selective |
| Absorption | 95% |
| Emission | 5% |
| Covering | low iron, structured, solar safety glass (ESG) |
| Impact of strength of the covering |
Fulfils requirements of EN 12975-2 |
| Heat insulation |
Mineral wool 50 mm |
| Collector case |
Wood, Sides and Back |
| Efficiency η0 | 78.1% |
| Heat Transmission coefficient k1 |
3.79 W/ (m² x K) |
| Heat Transmission coefficient k2 |
0.013 W/ (m² x K) |
| Max stagnation temperature |
210 °C |
| Max operating pressure |
10 bar |
| Certification | Solar Key mark (0117S038 F) EN 12975-2 |
3 Integrated Solar Panels Being Retrofitted
The Integrated Collectors are suitable for both new roofs and retrofitting to slate, flat or rolling tile roofs.
For more information about integrated solar panels in Cork please contact us.
“We have since realised annual savings of between €700 and €900 a year on our gas bills”
Mr. Murphy, Rochestown
“Of all the changes to the house since it was built, this has been the greatest”
Mr. O’Brien, Midleton